Angle Seat Valve
Model JZ-PN16 Angle Seat Valve
JZ-PN16 Threaded / welded angle seat valve
Function Principle
Angle seat valve is closed/open with a spring force. When the piston is actuated by compressed air, the angle seat valve is open/closed. The angle seat valve is open and closed by compressed air in the case of double acting type.
Applications
- Beer & Drinks Flling Machinery
- Textile Printing & Dyeing
- Gas Industry
- Pharmacy & Medical Equipment
- Chemical Industry
- Disinfection
- Frothing Equipment
- Water/Sewage Disposal
Advantages
- Large Flux,low Resistance, No Water-hammer
- Y-type Shape Enlarged The Flowing Section, which Could Raise The Flux By 30% And Make Flow More Smooth.
- Super Long Life
- Which Help The Stem Adjust And Lubricate itself Automatically.
- The Cylinder Ma terial Is Stainless Steel. lubricating Automatically, 360° Rolling Freely.
PARAMETERS
Technical Data
Fluid Prwsure | Max 1.6MPa(232psi) |
---|---|
Control Pressue | 0.3-0.8MPa(43.5-116psi) |
Control Fluid | Neutral gas, Air |
Body Material | CFSM/CFR |
Seals Material | PTFE |
Actuator Material | CF8 |
Actuator Size | 40mm, 50mm, 63mm, 90mm, 125mm |
Applicable Fluid | Water, Alcohol, Oil, Fuel, Steam, Neutral gas or liquid, Organic solvent, Acid and lye |
Fluid Viscosity | Mox 600mm²/s |
Fluid Temperature | -10&B12;~+180℃, 25℃~+220℃ |
Ambient Temperature | -10℃~+80℃ |
Control Type | Normally closed, Normally open, Double acting |
Connection | Threaded(BSP, BSPT, NPT), Welded, Flanged, Tri-clamp |
Dimension
size | actuator(mm) | Q | C | R | K | threaded connection | welded comedion | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
G | T | A | L | SW | HA | HL | DIN11850-2 | DIN11850-3 | ||||||||
D | S | D | S | |||||||||||||
DN10 | 40 | 1/8” | 50.5 | 27 | 112 | 3/8" | 12 | 124 | 68 | 27 | - | - | - | - | - | - |
50 | 1/8" | 60 | 33 | 125 | 135 | - | - | - | - | - | - | |||||
DN15 | 40 | 1/8" | 50.5 | 27 | 112 | 1/2" | 15 | 124 | 68 | 27 | 118 | 70 | 19 | 1.5 | 20 | 2 |
50 | 1/8" | 60 | 33 | 125 | 135 | 128 | ||||||||||
DN20 | 50 | 1/8" | 60 | 33 | 132 | 3/4" | 16 | 140 | 75 | 32 | 135 | 82 | 23 | 1.5 | 24 | 2 |
DN25 | 50 | 1/8" | 60 | 33 | 136 | 1" | 17 | 150 | 90 | 40 | 150 | 100 | 29 | 1.5 | 30 | 2 |
63 | 1/8" | 75 | 41 | 162 | 172 | 175 | ||||||||||
90 AL | 1/8" | 112 | 57 | 210 | 215 | 216 | ||||||||||
90 | 1/8" | 106 | 55 | 211 | 216 | 218 | ||||||||||
DN32 | 63 | 1/8" | 75 | 41 | 174 | 1 1/4" | 21 | 190 | 116 | 50 | 136 | 125 | 35 | 1.5 | 36 | 2 |
90 AL | 1/8" | 112 | 57 | 220 | 230 | 230 | ||||||||||
90 | 1/8" | 106 | 55 | 223 | 235 | 232 | ||||||||||
DN40 | 63 | 1/8" | 75 | 41 | 175 | 1 1/2" | 21 | 190 | 116 | 56 | 190 | 130 | 41 | 1.5 | 42 | 2 |
90 AL | 1/8" | 112 | 57 | 220 | 230 | 232 | ||||||||||
90 | 1/8" | 106 | 55 | 223 | 235 | 235 | ||||||||||
DN50 | 63 | 1/8" | 75 | 41 | 183 | 2" | 22 | 205 | 138 | 69 | 206 | 155 | 53 | 1.5 | 54 | 2 |
90 AL | 1/8" | 112 | 57 | 232 | 245 | 247 | ||||||||||
90 | 1/8" | 106 | 55 | 232 | 250 | 250 | ||||||||||
125 AL | 1/4" | 148 | 74 | 287 | 294 | 250 | ||||||||||
DN65 | 90AL | 1/8" | 112 | 57 | 262 | 2 1/2" | 26 | 282 | 178 | 85 | 320 | 270 | 70 | 2 | - | - |
90 | 1/8" | 106 | 55 | 265 | 285 | 325 | - | - | ||||||||
125 AL | 1/4" | 148 | 74 | 302 | 320 | 365 | - | - | ||||||||
DN80 | 125 AL | 1/4" | 148 | 74 | 313 | 3" | 27 | 372 | 210 | 100 | 370 | 284 | 85 | 2 | - | - |